High-profile product launches, international corporate congresses, and mega exhibitions hosted at the Saigon Exhibition and Convention Center (SECC, District 7) increasingly demand awe-inspiring spatial architectures: unobstructed column-free stages, curved LED screen walls spanning dozens of meters, and multi-ton overhead lighting and kinetic rigging grids. Ensuring absolute structural integrity for overhead spans exceeding 24 meters requires rigorous mechanical engineering, certified lifting hardware, and uncompromising site coordination. Below is the structural engineering breakdown from the Tin Long heavy fabrication and rigging division.
Figure 1: High-capacity aluminum box truss grid supporting concert lighting and curved LED walls at SECC Hall A.
1. Aircraft-Grade Aluminum Alloy Trusses vs. Heavy Structural Steel
Selecting the optimal structural medium depends directly on span length, point loading density, and permissible rigging timeframes.
1.1. EN AW-6082-T6 Aluminum Alloy Box Trusses
For modular overhead grids, lighting bars, and temporary flying canopies, Tin Long deploys certified EN AW-6082-T6 aluminum alloy spigot trusses (dimensions 400x400mm and heavy-duty 520x760mm). Featuring main chord tubes of Ø50x4mm and diagonal braces of Ø30x3mm, this structural alloy combines high yield strength (minimum 260 MPa) with exceptional strength-to-weight ratios, minimizing dead weight suspended from hall rigging points.
1.2. Heavy Structural Steel Trusses for Giant Spans (> 20m)
When stage concepts demand massive point loads—such as flying automobiles, suspended kinetic acrobatic platforms, or LED video walls weighing over 6 tons—aluminum reaches deflection limitations. Tin Long fabricates bespoke structural steel planar trusses and space frames utilizing high-tensile steel tubing (JIS G3444 STK490 / ASTM A500 Grade B) at our Nha Be production facility, delivering absolute rigidity under extreme loading.
Figure 2: Trial assembly and deflection inspection of a 24-meter heavy steel stage truss at the Nha Be plant.
2. Rigging Engineering: Dead Weight & Dynamic Shock Load Modeling
Overhead rigging is governed by zero-tolerance safety physics. A single fastener failure overhead can trigger catastrophic collapse.
2.1. Finite Element Analysis (FEA) & Deflection Criteria
Tin Long engineers model every truss structure using specialized structural software (SAP2000 / RSTAB). Under full dead load plus a dynamic safety factor of 1.4x, maximum mid-span deflection is strictly held within L/300 (where L is the span length in millimeters), ensuring suspended LED panels remain perfectly planar without tile seam pinching or module dislocation.
2.2. D8+ Certified Electric Chain Hoists & Dual-Brake Safety
All vertical lifting operations employ BGV-D8+ / EN 14492-2 certified electric chain hoists featuring dual independent electromagnetic brakes, overload clutches, and an 8:1 minimum safety design factor. Unlike standard industrial cranes, D8+ hoists are legally certified to hold static loads suspended above personnel without requiring secondary safety dead-hang safeties.
| Structural System | Primary Material / Rating | Span Capability | Allowable Uniform Load | Safety Standard Compliance |
|---|---|---|---|---|
| Aluminum Square Truss 400x400 | EN AW-6082-T6, Ø50x4mm tube | Up to 16.0 meters | 450 kg/m @ 12m span | TÜV NORD / DIN EN 1999 (Eurocode 9) |
| Heavy Duty Truss 520x760 | EN AW-6082-T6, Ø60x5mm tube | Up to 24.0 meters | 950 kg/m @ 18m span | TÜV NORD / ANSI E1.2-2012 |
| Welded Steel Box Truss | ASTM A500 Gr. B / SS400 | Up to 36.0 meters | 1,800 kg/m @ 24m span | TCVN 5575:2012 / AWS D1.1 |
| Stage Chain Hoists (D8+) | Grade 80 calibrated steel chain | 1.0 ton & 2.0 ton SWL | Dual independent disk brakes | DIN 56950-1 / VPLT SR2.0 |
| Secondary Rigging Slings | Steel wire rope 6x36 IWRC | 12mm – 16mm diameter | Safety factor 10:1 (entertainment) | BS EN 12385-4 / OSHA 1926.251 |
Figure 3: High-precision laser cutting of heavy steel connection flanges and multi-directional truss nodes.
3. Ground-Support Tower Bases & Diagonal Bracing Systems
Where roof hanging points are limited or unavailable within exhibition halls, Tin Long erects self-supporting ground-support tower systems.
3.1. Outrigger Bases with Precision Ballast Stabilization
Each vertical corner mast is anchored to a heavy-duty steel outrigger base fitted with high-load leveling jacks. Solid steel counterweight blocks (ballast) are calculated to provide a minimum overturning safety factor of 2.0x against lateral forces.
3.2. Guy-Wire Tensioning & Swaged Steel Cables
To eliminate sway caused by indoor HVAC airflow or moving kinetic stage elements, structures are reinforced with diagonal cross-bracing using 10mm galvanized aircraft cables fitted with turnbuckles and Crosby forged rigging shackles, calibrated with inline dynamometers.
Figure 4: Tin Long heavy fabrication facility in Nha Be capable of manufacturing large-scale structural frames.
4. On-Site Erection Workflow & Commissioning Protocol
Overhead rigging at SECC is scheduled during designated night slots under direct supervision of certified lead riggers.
4.1. Ground Assembly & Load Pin Inspection
The entire truss grid is pinned together at floor level. Every spigot pin is secured with spring safety R-clips. Rigging bridles and load cells are connected before lifting begins.
4.2. Synchronized Multi-Motor Hoisting & Load Cell Monitoring
Lifting is coordinated using multi-channel digital motor controllers. Technicians monitor real-time cable tension to prevent asynchronous lifting, ensuring the grid ascends perfectly level to its final trim height.
Figure 5: Professional rigging team executing synchronized stage truss lifting under rigorous safety standards.
5. Engineering Excellence from Tin Long
In entertainment staging and mega-exhibitions, structural safety is an absolute prerequisite. Combining in-house heavy structural steel fabrication at our 1,000 m² Nha Be workshop, genuine certified aluminum truss assets, and licensed structural sign-offs, Tin Long is the trusted engineering partner for grand-scale stages and corporate events at SECC District 7.